Engine Control/Fuel System

Filler-Neck Assembly Repair procedures

8steps
~48min
2/5difficulty
Done 0 of 8

Removal

  1. Open the fuel filler door.

  2. Switch "OFF" the ignition and disconnect the negative (-) terminal of the auxiliary 12V battery.

  3. Remove the filler-neck assembly mounting bolt (A).

  4. Lift the vehicle.

  5. Remove the rear-LH wheel, tire, and the inner wheel house (A).

  6. Disconenct the fuel filler hose (A) and leveling hose (B).

  7. Disconnect the ventilation tube quick-connector (C).

  8. Remove the filler-neck assembly (B) after loosening the mounting bolt (A).

Installation

  1. Install in the reverse order of removal.