Engine Control/Fuel System

Fuel Line Repair procedures

16steps
~96min
4/5difficulty
0102030405032.424N·mlb·ft
Tightening torque found on this page
Done 0 of 16

Removal

Low Pressure Fuel Line [High Pressure Fuel Pump ↔ Fuel Tank]

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - "Release Residual Pressure in Fuel Line")

  2. TSwitch "OFF" the ignition and disconnect the negative (-) battery terminal.

  3. Disconnect the low pressrue fuel line quick-connector (A) from the high pressure fuel pump.

  4. Disconnect the vapor hose (A) from the PCSV.

  5. Lift the vehicle.

  6. Remove the under cover [LH] (A) after loosening the mounting bolt and nuts.

  7. Remove the fuel tank.

    (Refer to to Fuel Delivery System - "Fuel Tank")

  8. Remove the front sub frame.

    (Refer to Suspension System - "Sub Frame")

  9. Remove the fuel line (A) after loosening the mounting bolts and bracket.

High Pressure Fuel Line [High Pressure Fuel Pump ↔ Delivery Pipe]

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - "Release Residual Pressure in Fuel Line")

  2. Switch "OFF" the ignition and disconnect the negative (-) terminal of the auxiliary 12V battery.

  3. Disconnect the PCV hose (A).

  4. Remove the high pressure pipe flange nut (A) by using the special service tool (B) [SST No. 09314 - 3Q100 or 09314 - 27130].

    High pressure fuel pipe flange nut:

    26.5 - 32 N·m

  5. Remove the high pressure pipe flange nut (A) by using the special service tool (B) [SST No. 09314 - 3Q100 or 09314 - 27130].

    High pressure fuel pipe flange nut:

    26.5 - 32 N·m

  6. Remove the high pressure fuel pipe function block mounting bolt (A).

  7. Remove the high pressure fuel pipe (B).

    High pressure fuel pipe function block mounting bolt:

    9.8 - 11,8 N·m

Installation

  1. Install in the reverse order of removal.