Fuel Tank Repair procedures
Removal
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
Remove the rear seat cushion.
(Refer to Body - "Rear Seat Assembly")
Fuel pump service cover (A).

Remove the fuel pump control module connector (A).
Disconnect the fuel pressure sensor connector (B).
Disconnect the fuel feed tube quick-connector (C).

Lift the vehicle.
Remove the center muffler.
(Refer to Engine Mechanical System - "Muffler")
Disconnect the vapor tube quick-connector (A).

Disconnect the fuel filler hose (A), ventilation hose (B) and leveling tube quick-connector (C).

Support the tank on a jack (A).

Remove the fuel tank band mounting nuts (A).
Fuel tank band mounting nut :
39.2 - 54 N·m

Remove the fuel tank & canister assembly (A).

Remove the canister assembly (A).
(Refer to Emission Control System - "Canister" )

Installation
Install in the reverse order of removal.