Engine Control/Fuel System

High Pressure Fuel Pump Repair procedures

7steps
~52min
5/5difficulty
2special tools
0102030405014.711N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Removal

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - "Release Residual Pressure in Fuel Line").

  2. Switch "OFF" the ignition and disconnect the negative (-) terminal of the auxiliary 12V battery.

  3. Remove the air cleaner and intake hose.

    (Refer to Mechanical System - "Air Cleaner")

  4. Disconnect the fuel pressure control valve connector (A).

  5. Disconnect the feed tube quick-connector (B) by using a clip tool.

  6. Remove the high pressure fuel pipe.

    (Refer to Fuel Delivery System - "Fuel Line")

  7. Remove the installation bolts (A), and then remove the high pressure fuel pump (B) from the cylinder head assembly.

    High pressure fuel pump mounting bolt:

    12.8 - 14,7 N·m

Installation

  1. Install in the reverse order of removal.