Kia Sorento XM 2011-2023 Repair Manual

Seat Belt Buckle Switch (BS) Installation

In this manual: Kia Sorento XM 2011-2023 Repair Manual
Kia Sorento XM Owner's Manual. — 168Kia Sorento XM 2011-2023 Repair Manual — 1285
6steps
~36min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 6

  1. Remove the ignition key from the vehicle.
  2. Disconnect the negative battery cable and wait at least three minutes before starting work.
  3. Install the seat belt buckle and buckle switch.

    Bolt B tightening torque: 39.2 ~ 54 N·m

  4. Install the front seat assembly. (Refer to Body - Front Seat group)
  5. Connect the negative battery cable.
  6. After installing the seat belt buckle switch, check that the system operates correctly:
    A. Turn the ignition ON; the SRS indicator should illuminate for about six seconds and then go off.

Test yourself

A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.