Kia Sorento XM 2011-2023 Repair Manual

SRSCM Installation

In this manual: Kia Sorento XM 2011-2023 Repair Manual
Kia Sorento XM Owner's Manual. — 168Kia Sorento XM 2011-2023 Repair Manual — 1285
7steps
~42min
2/5difficulty
01020304050129N·mlb·ft
Tightening torque found on this page
Done 0 of 7
  1. Remove the ignition key from the vehicle.
  2. Disconnect the negative battery cable and wait at least three minutes before starting work.
  3. Install the SRSCM using the SRSCM mounting bolts.

    Tightening torque: 8.0 ~ 12 N·m

  4. Connect the SRSCM wiring harness connector.
  5. Install the rear ventilation duct and floor console. (Refer to Body - "Floor Console")
  6. Connect the negative battery cable.
  7. After installing the SRSCM, check that the system operates correctly:
    A. Turn the ignition ON; the SRS indicator should illuminate for about six seconds and then go off.

Test yourself

A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.