Center Pillar Trim

Components and Component Location

Component Location

Repair Procedures

Replacement

1. 1

   Using a trim removal tool, remove the front door sill trim (A).

   

2. 2

   After loosening the mounting bolts, separate the rear seat cushion (A).

   

3. 3

   Remove the rear seat cushion after disconnecting the heater connector (A).

   

4. 4

   After loosening the mounting bolts, remove the rear side seat (A) by pulling it upward.

   

5. 5

   After removing the mounting clip, remove the rear door sill garnish (A).

   

6. 6

   Remove the seat belt (B) from the EFD system (A) using SST (0K888-D4200).

   

7. 7

   Remove the center pillar lower garnish (A).

   

8. 8

   Remove the upper center pillar garnish (A).

   

9. 9

   Install in the reverse order of removal.