Kia Stinger CK Quiz
Front Seat Belt

Rear Pillar Trim

In this manual: Front Seat Belt
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
8steps
~48min
3/5difficulty
Done 0 of 8

Components and Component Location

Component Location

1. Rear Pillar Trim

Repair Procedures

Replacement

  1. Remove the rear seat assembly.

    (Refer to Rear Seat - "Rear Seat Assembly")

  2. Remove the luggage compartment floor covering (A).

  3. Remove the center tray (A).

  4. Remove the rear cross garnish (A).

  5. After loosening the mounting screws, separate the luggage compartment side trim (A).

  6. Remove the luggage compartment side trim after disconnecting the luggage compartment lamp connector (A).

  7. Remove the rear pillar trim (A).

  8. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.