Kia Stonic Quiz
Drive Shafts and Axles

Rear hub/carrier

In this manual: Drive Shafts and Axles
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
10steps
~60min
3/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 10

Components and Components Location

COMPONENTS LOCATION

1. Torsion bar
2. Rear spring		 3. Rear Brake Disc

repair procedures

expansion

  1. Remove the wheel and tire.

    Tightening torque: 107.9 ~ 128 N·m

  2. Remove the brake caliper (A) and parking brake cable (B).

  3. Remove the rear brake caliper (A).

    Tightening torque: 78.4 ~ 98 N·m

  4. First loosen the fixing screw, then remove the wheel brake disc (A).

    Tightening torque: 4.9 ~ 6.9 N·m

  5. Loosen the bolts and remove the hub (A) from the torsion beam axle.

    Tightening torque: 49.0~59 N·m

  6. Installation is the reverse of removal.

TEST

  1. Check the hub for cracks and tooth wear.

  2. Check the brake disc for scratches and damage.

  3. Check the steering knuckle for cracks.

  4. Check the bearings for cracks or damage.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.