Suspension
Specifications
In this manual: Suspension
~2min read
Überprüfen.
SPECIFICATIONS
VORDERE AUFHÄNGUNG
| No. | SPECIFICATIONS |
| Aufhängungstyp | MacPherson Strut |
| Shock Absorber Type | Allgemeines Ventil |
HINTERE AUFHÄNGUNG
| No. | SPECIFICATIONS |
| Aufhängungstyp | Drehstabachsenkupplung |
| Shock Absorber Type | Allgemeines Ventil |
Wheel and Tire
| No. | SPECIFICATIONS | ||
| WARNING | TIP | ||
| WHEEL | Alloy | 6.0J × 15 | |
| 6.5J × 17 | |||
| TIRE | 185/65R15 | ||
| 205/55 R17 | |||
| T125/80 D15 | |||
| Tire Pressure | 185/65R15 | 240 - 247 kPa | 250 - 257 kPa |
| 205/55 R17 | 240 - 247 kPa | 260 - 267 kPa | |
| T125/80 D15 | 420–427 kPa (60–61 psi) | ||
Wheel Alignment
| No. | SPECIFICATIONS | ||
| WARNING | TIP | ||
| Toe-in | Individual | 0,075°±0,1° | 0,15° ± 0,15° |
| Total | 0,15°±0,2° | 0,3°±0,3° | |
| Camber Angle | -0,5° ± 0,5° | - 1,5° ± 0,5° | |
| Caster Angle | 4,45°±0,5° | - | |
| Kingpin Inclination | 13,3°±0,5° | - | |
| Ride Height | 391 ± 10 mm | 395 ± 10 mm | |
Anzugsdrehmoment
Anzugsdrehmomente
VORDERE AUFHÄNGUNG
| No. | Tightening Torque (kgf·m) | ||
| Nm | kgf·m | lb-ft | |
| Wheel hub nuts | 107,9 ~ 127,5 | 11,0 ~ 13,0 | 79,6 ~ 94,0 |
| Verbindung zwischen Federbeineinheit und Gelenk | 98,1 ~ 117,7 | 10,0 ~ 12,0 | 72,3 ~ 86,8 |
| Strut Lock Nut | 49,0 - 58,8 | 5,0 - 6,0 | 36,2 - 43,4 |
| Lower Control Arm and Subframe (Front) | 117,7 ~ 137,3 | 12,0 ~ 14,0 | 86,8 ~ 101,3 |
| Lower Control Arm and Subframe (Rear) | 156,9 ~ 176,5 | 16,0 ~ 18,0 | 115,7 ~ 130,2 |
| Unterer Tragarm an Achsschenkel | 58,8 ~ 70,6 | 6,0-7,2 | 43,4 ~ 52,1 |
| Stabilizer Bar Mount and Strut | 98,1 ~ 117,7 | 10,0 ~12,0 | 72,3 ~ 86,8 |
| Stabilizer Bar and Stabilizer Bar Mount | 98,1 ~ 117,7 | 10,0 ~ 12,0 | 72,3 ~ 86,8 |
| Stabilizer Bar to Subframe | 44,1 ~ 53,9 | 4,5 ~ 5,5 | 32,5 ~ 39,8 |
| Tie rod end ball joint nut | 22,6 - 33,3 | 2,3 - 3,4 | 16,6 - 24,5 |
| Universal Joint to Steering Pinion | 32,4 ~ 37,3 | 3,3 ~ 3,8 | 23,9 ~ 27,5 |
| Steering Gear and Subframe | 88,3 ~ 107,9 | 9,0 ~ 11,0 | - |
| Subframe Mounting Nuts (Front) | 176,5 ~ 196,1 | 18,0 ~ 20,0 | 130,2 ~ 144,7 |
| Subframe Mounting Bolts | 176,5 ~ 196,1 | 18,0 ~ 20,0 | 130,2 ~ 144,7 |
HINTERE AUFHÄNGUNG
| No. | Tightening Torque (kgf·m) | ||
| Nm | kgf·m | lb-ft | |
| Hub Nuts | 107,9 ~ 127,5 | 11,0 ~ 13,0 | 79,6 ~ 94,0 |
| Shock Absorber and Body | 49,0 ~ 63,7 | 5,0 ~ 6,5 | 36,2 ~ 47,0 |
| Stoßdämpfer an Drehstab | 98,1 ~ 117,7 | 10,0 ~ 12,0 | 72,3 ~ 86,8 |
| Torsion Bar and Frame | 117,7 ~ 137,3 | 12,0 ~ 14,0 | 86,8 ~ 101,3 |
| Torsion Bar and Rear Axle | 49,0 - 58,8 | 5,0 - 6,0 | 36,2 - 43,4 |
| Torsion Bar and Brake Caliper | 63,7 ~ 73,5 | 6,5 ~ 7,5 | 47,0 ~ 54,2 |
| Disc Mounting Bolt | 4,9 ~ 5,9 | 0,5 ~ 0,6 | 3,6 ~ 4,3 |
| Raddrehzahlsensorhalterung und Bremsschlauchhalterung | 8,8 ~ 13,7 | 0,9 ~ 1,4 | 6,5 ~ 10,7 |
Test yourself
A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?