Kia Optima DL3 Quiz
Body (Interior and Exterior)

Front Bumper Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Advanced Driver Assistance System (ADAS) — 21Maintenance — 27Engine Mechanical System — 45Engine Electrical System — 11Emission Control System — 11Engine Control System/Fuel System — 25Automatic Transmission — 20Drive Shaft and Axle — 7Suspension System — 22Steering — 7Restraints — 11Brake System — 22Body (Interior and Exterior) — 116Body Electrical System — 90Heating, Ventilation, and Air Conditioning — 32
7steps
~42min
2/5difficulty
Done 0 of 7

Components and Component Location

Component Location

1. Front Bumper Assembly

Repair Procedures

Replacement

  1. Remove the air duct (A).

  2. Loosen the clips securing the upper radiator cover.

  3. Loosen the front bumper lower retainers.

  4. Loosen the pin retainers and screws on the side of the front bumper, then disconnect the side of the front bumper.

  5. Remove the front bumper assembly (A).

  6. Press the lock pin and disconnect the front bumper main connector (A).

    [LH]

    [RH]

  7. To install, reverse the removal procedure.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.