Body Electrical System

AVN Head Unit (Audio Video Navigation)

7steps
~42min
2/5difficulty
Done 0 of 7

Components and Component Location

Components

Connector Pin Information
No. Connector A Connector B
1 Left rear door speaker (+) -
2 Left rear door speaker (-) MIC (+)
3 - -
4 - -
5 - Antenna Power
6 Camera Power Illumination (+)
7 Camera Video Non-e-Call type: -
e-Call type: Multimedia CAN (High)
8 - -
9 - ALT Left Output (-)
10 AUX Audio Input_Right Battery (+)
11 AUX Detection Battery (+)
12 Steering Wheel Remote Control Ground
13 Left front door speaker (+) Ground
14 Left front door speaker (-) -
15 Right front door speaker (-) MIC (-)
16 Right front door speaker (+) -
17 - -
18 - -
19 - Default: Ground
Option: Illumination (-)
20 Camera Power _ Ground Non-e-Call type: -
e-Call type: Multimedia CAN (Low)
21 Camera Video _ Ground -
22 - ACC
23 - -
24 AUX Audio Input_Left -
25 AUX Audio_Ground Provide Regression
26 Steering Wheel Remote Control (Ground) Door Open
27 Right rear door speaker (-) Door Unlock Status
28 Right rear door speaker (+) Parking Brake
29 - "P" Position
30 - Auto Light
31 - -
32 - -
33 Camera Screen_Ground IGN1
34 - -
35 - -
36 -
37 -
38 Vehicle Speed

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center panel. (Refer to Body - "Center Panel")
  3. Remove the AVN head unit (A) after loosening the mounting screws and nut.
  4. Remove the AVN head unit after disconnecting the connectors and antenna cable (A).

Installation

  1. Install the AVN head unit after connecting the AVN head unit connectors and cable.
  2. Install the center fascia panel.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.