Engine Control System/Fuel System
Fuel filter
In this manual: Engine Control System/Fuel System
11steps
~66min
3/5difficulty
Done 0 of 11
Repair Procedures
Removal
- Remove the fuel pump. (Refer to Fuel System - "Fuel Pump")
- Disconnect the fuel pump motor connector (A) and the fuel level sensor connector (B).

- Disconnect the quick-connect fitting (A) of the fuel feed tube after removing the retaining clip (B).

- Remove the damper tube fixing clip (A), then separate the head assembly (B) from the reservoir cup.

- Press the retaining hook (A) with a screwdriver and remove the fuel level sensor in the direction of the arrow.

- Remove the reservoir cup (B) after releasing the locking hooks (A).

- Disconnect the ground terminal (A).

- Remove the retaining clip (A) and support the fuel pump assembly (B).

- Remove the fuel filter (A) after releasing the retaining hooks.

- Separate the fuel pump motor (A).

- Replace with a new fuel filter.

Installation
- Install in the reverse order of removal.
Test yourself
A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?