Kia Picanto JA Quiz
Engine Control System/Fuel System

Filler Neck Assembly

In this manual: Engine Control System/Fuel System
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
5steps
~30min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Repair Procedures

Removal

  1. Open the fuel filler door and remove the filler neck mounting bolts (A). Filler neck assembly bolt: 7.8–11.8 N·m
  2. Lower the vehicle.
  3. Remove the rear LH wheel, tire and inner wheel housing.
  4. Disconnect the filler hose (A), the leveling hose (B), and the vent hose (C).
  5. Remove the filler neck assembly from the vehicle by removing the bracket mounting bolt (A). Filler neck bracket bolt: 7.8–11.8 N·m

Installation

  1. Installation is the reverse of removal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.