Engine Control System/Fuel System
Fuel Pressure Regulator
In this manual: Engine Control System/Fuel System
8steps
~48min
2/5difficulty
Done 0 of 8
Repair Procedures
Removal
- Remove the fuel pump. (Refer to Fuel System - "Fuel Pump")
- Disconnect the fuel pump motor connector (A) and the fuel level sensor connector (B).

- Disconnect the quick-connect fitting (A) of the fuel feed tube after removing the retaining clip (B).

- Remove the damper tube fixing clip (A), then separate the head assembly (B) from the reservoir cup.

- Press the retaining hook (A) with a screwdriver and remove the fuel level sensor in the direction of the arrow.

- Remove the reservoir cup (B) after releasing the locking hooks (A).

- Remove the fuel pressure regulator retaining bracket (A).

- Remove the fuel pressure regulator (A) from the fuel filter.


Installation
- Install in the reverse order of removal.
Test yourself
A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?