Kia Picanto JA Quiz
Engine Control System/Fuel System

ISG switch

In this manual: Engine Control System/Fuel System
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
10steps
~60min
3/5difficulty
Done 0 of 10

Components and Component Location

Components

1. ISG Switch

Description and Operation

Description

The ISG OFF switch on the floor console can be used to deactivate the ISG function.

Circuit Diagrams

Wiring Diagram

Repair Procedures

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the handle (A) by pulling it in the direction of the arrow.
  3. Using a puller, remove the console indicator cover assembly (B).
  4. Disconnect the connector (A) from the console indicator cover assembly.
  5. Remove the console upper cover switch (A) after loosening the mounting screws.

Installation

  1. Install the console upper cover switch.
  2. Connect the connector to the console indicator cover assembly.
  3. Install the console indicator cover assembly.
  4. Install the shift lever and transmission boots.
  5. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.