Body Electrical System

Power door mirror actuator

5steps
~30min
2/5difficulty
Done 0 of 5

Components and Component Location

Components

1. Side Repeater

Repair Procedures

Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door inside quarter trim panel (A).
  3. Disconnect the tweeter connector (A).
  4. Disconnect the power outside mirror connector from the wiring harness.
  5. Apply battery voltage to each terminal as shown in the table, and check that the mirror operates correctly. [Mirror Control (LH/RH)]
    [Mirror Heater]
    [Side Repeater Lamp]
    [Folding Mirror]

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.