Kia Picanto JA Quiz
Body Electrical System

Power door mirror switch

In this manual: Body Electrical System
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
6steps
~36min
2/5difficulty
Done 0 of 6

Components and Component Location

Component

Circuit Diagrams

Wiring Diagram

[Folding Mirror Type]

[Non-Folding Mirror Type]

Repair Procedures

Inspection

  1. Check the continuity between the terminals at each switch position according to the table.
    [Power Mirror Switch]
    [Power Mirror Switch]

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front left door trim. (Refer to Body - "Front Door Trim")
  3. Remove the power mirror switch assembly (A) by pulling both ends of the switch holders (B).

Installation

  1. Install the power mirror switch.
  2. Install the front door trim after connecting the connector.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.