Remove the front left door trim. (Refer to Body - "Front Door Trim")
Remove the power window switch assembly (A) by pulling both ends of the switch holders (B).
Disconnect the negative (-) battery terminal.
Remove the front right door trim panel. (Refer to Body - "Front Door Trim Panel")
Remove the power window switch assembly (A) by pulling both ends of the switch holders (B).
Disconnect the negative (-) battery terminal.
Remove the rear door trim panel. (Refer to Body - "Rear Door Trim")
Remove the power window switch assembly (A) by pulling both ends of the switch holders (B).
Auxiliary Power Window Switch Rear Power Window Switch
Installation
Driver Window Switch
Install the driver's power window switch.
Install the front door trim after connecting the connector.
Connect the negative (-) battery terminal.
Install the auxiliary power window switch.
Install the front door trim after connecting the connector.
Connect the negative (-) battery terminal.
Install the rear power window switch.
Install the rear door trim after connecting the connector.
Connect the negative (-) battery terminal.
Auxiliary Power Window Switch Rear Power Window Switch
Inspection
Driver Window Switch
Disconnect the negative (-) battery terminal.
Remove the front left door trim panel.
Disconnect the power window switch connector from the door trim panel.
Check for continuity between the terminals in each switch position according to the table. If the continuity is not as specified, replace the switch. [All Manual / Automatic Down Type] (LHD)(Right-Hand Drive)[Driver Safety Type] (LHD)(Right-Hand Drive)Power Door Lock SwitchPower Window Lock Switch
Disconnect the negative (-) battery terminal.
Remove the front right door trim panel / rear door trim panel. (Refer to Body - "Front Door Trim Panel") (Refer to Body - "Rear Door Trim Panel")
Disconnect the power window switch connector from the door trim panel. [Auxiliary Power Window Switch][Rear Power Window Switch]
Check for continuity between the terminals in each switch position according to the table. If the continuity is not as specified, replace the switch.
The body electrical system can be quickly diagnosed for faulty parts using the vehicle diagnostic system (KDS/GDS). The diagnostic system (KDS/GDS) provides the following information.
Self-Diagnosis: Checks and displays diagnostic trouble codes (DTC)
Current Data: Checks the input/output status of the system.
Actuation Test: Checks the operating condition of the system.
Additional Functions: Other controls such as system option and zero point
Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
Select "Body Control Module (BCM)" to check the body control module (BCM).
Select the "Current Data" menu to view the current input/output status. The input/output data for the sensors related to the door lock switch can be checked.
To forcibly check the operation of the power door lock, select "Active Test" of the BCM.
Auxiliary/Rear Power Window Switch Diagnosis with KDS/GDS
?
Test yourself
A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.