AVN Remote Control

Components and Component Location

Components

Circuit Diagrams

Wiring Diagram

[Audio]

[Audio + Bluetooth]

[Audio + Bluetooth + Voice]

[Trip]

[Trip + ACC (2 buttons)]

[Off + ACC + SLD (2 buttons)]

[Trip + ACC (4 buttons)]

[Off + ACC + SLD (4 buttons)]

Repair Procedures

Removal

1. 1

   Disconnect the negative (-) battery terminal.

2. 2

   Remove the steering wheel assembly.

   (Refer to Steering System - "Steering Wheel")

3. 3

   Remove the remote control switch from the steering wheel (A) after loosening the mounting screws.

   [LH]

   

   

   [RH]

   

   

4. 4

   Disconnect the remote control connector on the steering wheel (A).

   [LH]

   

   [RH]

   

Installation

1. 1

   Connect the remote control switch connector on the steering wheel.

2. 2

   Install the remote control switch on the steering wheel.

3. 3

   Install the steering wheel and the driver airbag module.

4. 4

   Connect the negative (-) battery terminal.

Inspection

1. 1

   Check the resistance between the terminals at each switch position (LH).

   

   [L: Audio + Hands-free + Voice]

   Switch	Connector Terminal	Resistance (±3%)
   SEEK UP	1-6	430 Ω
   SEEK DOWN		1.11 kΩ
   MODE		2.11 kΩ
   MUTE		3.11 kΩ
   VOL (+)		4.61 kΩ
   VOL (-)		6.81 kΩ
   Voice		10.71 kΩ
   END		18.91 kΩ
   SEND		40.91 kΩ

2. 2

   Check the resistance between terminals at each switch position (RH).

   

   [P: Cruise + Trip]

   Switch	Connector Terminal	Resistance (±3%)
   Cancel	2-6	390 Ω
   SET -		610 Ω
   VOICE +		910 Ω
   CRUISE ON/OFF		1.38 kΩ
   Cruise and Speed Limiter ON/OFF Cruise Mode		2.13 kΩ
   GROUP	1-6	390 Ω
   STEP		610 Ω
   TRIP DOWN		910 Ω
   OK / Reset		1.38 kΩ