Kia Rio YB Quiz
Body (Interior and Exterior)

Floor Console Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
11steps
~66min
3/5difficulty
Done 0 of 11

Components and Component Location

Component Location

1. Floor Console Assembly

Repair Procedures

Replacement

  1. To remove the shift lever knob and boot (A), pull them upward.

  2. Using a removal tool, remove the floor console upper cover (A).

  3. Disconnect the connectors (A) from the floor console upper cover.

  4. Remove the parking brake cover (A).

  5. Remove the console bracket (A) after loosening the screws.

  6. Disconnect the console connector (A) and loosen the mounting bolt.

  7. Remove the floor console armrest pad (A).

  8. Loosen the console upper mounting bolts (A).

  9. Loosen the front console mounting screws on both sides (A).

  10. Remove the console (A) completely.

  11. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.