Kia Rio YB Quiz
Clutch System

Ignition Switch

In this manual: Clutch System
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
5steps
~30min
2/5difficulty
010203040503.93N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Specifications

Specifications

Item Specifications
Operating Voltage 12.5 V DC
Operating Force Initial position: 0.25 ± 0.15 N (0.025 ± 0.015 kgf, 0.056 ± 0.034 lbf)
Full position: 0.8 ± 0.2 N (0.08 ± 0.02 kgf, 0.579 ± 0.014 lbf·ft)
Operating Temperature -40°C to 80 °C

Description and Operation

Description

  • The ignition lock switch is installed on the clutch pedal.

  • The ignition lock switch operates when the clutch pedal is depressed.

  • If the clutch pedal is not depressed, the engine will not start.

Repair Procedures

Inspection

Component Inspection

  1. Remove the clutch switch and ignition lock switch.

  2. Turn the switch lever in the direction of the arrow to check the operation at point (A).

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.

  2. Disconnect the ignition switch connector (A).

  3. Remove the ignition switch and clutch switch (B).

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.