Kia Rio YB Quiz
Body (Interior and Exterior)

Rear Bumper Beam Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
5steps
~30min
2/5difficulty
Done 0 of 5

Components and Component Location

Component Location

1. Rear bumper beam assembly

Repair Procedures

Replacement

  1. Remove the rear bumper cover.

    (Refer to Rear Bumper - "Rear Bumper Assembly")

  2. Disconnect the rear bumper beam mounting wiring harness (A).

  3. Remove the rear bumper beam assembly (A) after releasing the clips.

  4. Remove the electronic key antenna (A) after loosening the screw.

  5. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.