Kia Rio YB Quiz
Body (Interior and Exterior)

Rear Seat Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
5steps
~30min
2/5difficulty
0102030405031.423N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Components and Component Location

Component Location

1. Rear Seat Cushion Assembly 2. Rear Seat Back Assembly

Repair Procedures

Replacement

  1. Remove the rear seat cushion assembly (A) after loosening the bolt.

    Tightening Torque: 21.6–31 N·m

  2. Disconnect the rear center seat belt (A).

  3. Open the rear seat center hinge (A) after loosening the mounting bolt.

    Tightening Torque: 21.6–31 N·m

  4. Remove the rear seat back assembly (A).

  5. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.