System Operation

Ventilation

1. Set the mode toposition.

2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

Heating

1. Set the mode toposition.

2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

5. If dehumidified heating is required, turn on the air conditioning system (if equipped).

• If the windshield fogs up, set the mode toorposition.

• To prevent dust or unpleasant odors from entering the vehicle through the ventilation system, temporarily set the air intake control to the recirculation position. Be sure to return the control to the fresh air position once the dust or odor has cleared, to maintain fresh air in the vehicle. This will help keep the driver alert and comfortable.
• Air for the heating/cooling system is drawn in through the grille only in front of the windshield. Make sure the grille is not blocked by leaves, snow, ice, or other obstructions.
• To prevent interior windshield fogging, set the air intake control to the fresh air position, set the fan speed as desired, turn on the air conditioning, and adjust the temperature control to the desired temperature.