Turn Signals and Lane Change Signals

■ Type A

■ Type B

The ignition switch must be on for the turn signals to operate. To activate the turn signals, move the lever up or down (A). The green arrows on the instrument panel show which turn signal is operating.

They cancel automatically after the turn is completed. If the indicator continues to flash after the turn, manually return the lever to the OFF position.

To signal a lane change, lightly move the turn signal lever and hold it in that position (B). The lever returns to the OFF position when released.

If the indicator continues to illuminate without flashing, or flashes abnormally, one of the turn signal bulbs may have burned out and need to be replaced.

One-Touch Lane Change Function

To activate the one-touch lane change function, lightly move the turn signal lever and then release it. The lane change signals will flash 3, 5, or 7 times.

You can select the one-touch lane change signal function in "One Touch Turn Signal" under "User Settings". See "User Settings" in Chapter 4. (if equipped)

✽ NOTICE

If the indicator flashes abnormally fast or slow, a bulb may be burned out, missing, or have a poor electrical connection in the circuit.