Body Exterior, Doors, Roof & Vehicle Security

Fuel Filler Lid

~3min read

Exploded View

Fuel filler base assembly Fuel filler lid Fuel filler lid lock assembly
Fuel filler base mask
: Pawl
: Always replace after every disassembly.

Fuel Filler Lid

Removal and Installation

REMOVAL

Fully open fuel filler base assembly.

Disengage fuel filler lid fixing pawl using a removal tool (A), and then remove fuel filler lid according to numerical order 1→2 indicated by arrows as shown in figure.

: Pawl

INSTALLATION

Note the following items, and then install in the reverse order of removal.

Unit: mm [in]

PortionClearanceEvenness
Fuel filler lid – Body side outer

3.0 ± 1.0

[0.118 ± 0.039]

0.0 ± 1.0

[0.000 ± 0.039]

Fuel Filler Base Assembly

Removal and Installation

REMOVAL

Remove fuel filler lid. Refer to Removal and Installation.

Disengage fuel filler base mask fixing pawls using a remover tool (A) into drain hole , and then remove fuel filler base mask.

: Pawl

Drill holes at recessed parts of fuel filler base.

Insert a remover tool (B) into drill holes of fuel filler base assembly , and pull fuel filler base assembly to outside of vehicle while disengage fuel filler base assembly fixing pawls.

: Pawl

Remove fuel filler base assembly from vehicle body according to the numerical order 1→2 indicated by arrows as shown in figure.

Remove fuel filler lid lock assembly. Refer to Removal and Installation.

INSTALLATION

Install fuel filler lid lock assembly. Refer to Removal and Installation.

Install fuel filler base assembly to vehicle body according to the numerical order 1→2 indicated by arrows as shown in figure.

Install fuel filler base to rear wheel outer panel LH and body side inner panel .

Install fuel filler base mask to fuel filler base.

Install fuel filler lid to fuel filler base assembly. Refer to Removal and Installation.

Fuel Filler Lid Lock Assembly

Removal and Installation

REMOVAL

Remove fuel filler base assembly. Refer to Removal and Installation.

Rotate and disengage fuel filler lid lock assembly fixing pawls according to the numerical order 1→2 indicated by arrows as shown in the figure, and then remove fuel filler lid lock assembly.

: Pawl
: vehicle front

INSTALLATION

Note the following item, and then install in the reverse order of removal.