Body Exterior, Doors, Roof & Vehicle Security
Outside Key Antenna
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~1min read
Rear Door
Removal and Installation
REMOVAL
Remove rear door finisher. Refer to Removal & Installation.
Disconnect outside key antenna (rear door) harness connector.
Disengage outside key antenna (rear door) fixing clips, and then remove outside key antenna (rear door)
.
| : Clip |

Disengage clip fixing pawl using a remover tool (B), and then remove clip
.
| : Pawl |

INSTALLATION
Note the following items, and then install in the reverse order of removal.
Rear Bumper
Removal and Installation
REMOVAL
Remove rear bumper energy absorber. Refer to Removal and Installation.
Remove harness clip
.
Disconnect outside key antenna (rear bumper) harness connector.
Remove outside key antenna (rear bumper) fixing nuts
, and then remove outside key antenna (rear bumper)
.

INSTALLATION
Install in the reverse order of removal.
Was this page helpful?