Body Exterior, Doors, Roof & Vehicle Security
Selective Unlock Function Does Not Operate
In this manual: Body Exterior, Doors, Roof & Vehicle Security
2steps
~12min
1/5difficulty
Done 0 of 2
Diagnosis Procedure
CHECK “SELECTIVE UNLOCK” SETTING IN COMBINATION METER
Check “selective unlock” setting is ON.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Set “On” in combination meter.
REPLACE INTELLIGENT KEY UNIT
Replace Intelligent Key unit. Refer to Removal and Installation.
Confirm the operation after replacement.
Is the result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Was this page helpful?