In this manual: Transaxle & transmissioN CVT: RE0F11A
~1min read
Removal and Installation
REMOVAL
1. Remove clip from bracket.
2. Remove air breather hose from transaxle assembly.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION: • Check that air breather hose is not collapsed or blocked due to folding or bending when installed. • Securely install the clip to the bracket. • Be sure to insert it fully until its end reaches the stop when inserting air breather hose (1) to transaxle tube (A).
• Install air breather hose to transaxle tube so that the paint mark (B) is facing frontward.