Transaxle & transmissioN CVT: RE0F11A

CVT shift selector

In this manual: Transaxle & transmissioN CVT: RE0F11A
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~4min read

Exploded View

1. Selector lever knob

1. Selector lever knob 2. Lock pin
3. Knob cover
4 Position indication panel 5. CVT shift selector assembly 6. CVT shift selector harness assembly 7. Detent switch*
8. Shift lock unit
9. Park position switch

*: With push engine starter:N·m (kg-m, it-lb)
*: With push engine starter

Removal and Installation

REMOVAL

CAUTION:
Always apply the parking brake before performing removal and installation.
1. Disconnect battery cable from negative terminal. Refer to PG-124, "Exploded View". 2. Shift the selector lever to “N” position. 3. Remove the center console. Refer to IP-23, "Removal and Installation". 4. Disconnect the CVT shift selector connector. 5. Shift the selector lever to “P” position. 6. Remove the key interlock cable from the CVT shift selector assembly. Refer to TM-488, "Removal and Installation". 7. Remove the control cable from the CVT shift selector assembly. Refer to TM-485, "Exploded View".

8. Remove the CVT shift selector assembly.

INSTALLATION

Note the following, and install in the reverse order of removal.

• When connecting the control cable (1) to the CVT shift selector assembly (2), face the grooved surface of the rib (A) up and insert the control cable until it stops.

Disassembly and Assembly

Disassembly and Assembly

DISASSEMBLY

1. Slide the selector lever knob cover (1) down.

CAUTION:
Never damage the knob cover.
2. Pull out the lock pin (2). 3. Pull the selector lever knob (3) and knob cover upwards to remove them.

4. Remove the position lamp.

5. Disengage the hooks (A) (4 locations), and lift up the position

5. Disengage the hooks (A) (4 locations), and lift up the position indication panel (1) to separate it from the CVT shift selector assembly (2).

CAUTION:
Never damage the CVT shift selector assembly.
6. Lift up the shift lock unit pawl (A), and pull the unit out in the

6. Lift up the shift lock unit pawl (A), and pull the unit out in the direction indicated by the arrow () in the figure to separate it
) in the figure to separate it from the CVT shift selector assembly.

7. Disconnect the park position switch connector, detent switch connector, and shift lock solenoid connector from the shift lock unit.

NOTE

:
Remove the shift lock solenoid before disconnecting the shift lock solenoid connector.

8. Lift up the park position switch and detent switch pawls (A) and

8. Lift up the park position switch and detent switch pawls (A) and pull forward to remove.

9. Remove the key interlock rod.

10. Free any harnesses that are fastened to the CVT shift selector.

10. Free any harnesses that are fastened to the CVT shift selector.

11. Lift up the sports mode switch connector (A) pawls (B), and pull in the direction indicated by the arrow () in the figure to
) in the figure to remove.

12. Use a terminal tool or similar instrument (B) and press the pawl

12. Use a terminal tool or similar instrument (B) and press the pawl (C) on the rear side of the CVT shift selector harness connector (A). Then pull it in the direction of the arrow ( remove.) in the figure to
remove.

CAUTION:
Never damage the CVT shift selector assembly

.

13. Disconnect the CVT shift selector harness from the CVT shift selector.

INSTALLATION

INSTALLATION

Note the following, and install in the reverse order of removal.

• Follow the procedure below and place the selector knob onto the CVT shift selector.

1. Install the lock pin (2) onto the selector lever knob (3). 2. Install the knob cover (1) onto the selector lever knob.

3. Press the selector lever knob onto the selector lever until it clicks.

CAUTION:
• When pressing the selector lever knob onto the selector lever, never press the selector lever knob button.

• Never strike the selector lever knob to press it into place.

• Follow the procedure below and press the shift lock unit onto the

• Follow the procedure below and press the shift lock unit onto the CVT shift selector.

1. Connect the connectors. 2. Align the indented part (A) of the shift lock unit with the projecting part (B) of the CVT shift selector.

3. Insert the shift lock unit until the pawls (C) make a click sound.

Inspection

Inspection

INSPECTION AFTER INSTALLATION

Check the CVT position. If a malfunction is found, adjust the CVT position. Refer to TM-383, "Inspection and Adjustment".