Engine Mechanical K9K
Air cleaner and air duct
In this manual: Engine Mechanical K9K
~1min read
Exploded View

1. Turbocharger air inlet pipe 2. Clamp
3. Air duct (suction)
4. Air mass flow sensor 5. O-ring
6. Air duct (inlet)
7. Grommet
8. Air cleaner case
9. Air cleaner filter
10. Cover
11. Holder
A. : To turbocharger
: Vehicle front
: N·m (kg-m, in-lb)
: Always replace after every
disassembly.
Removal and Installation
REMOVAL
1. Remove resonator. 2. Remove air duct (inlet). 3. Remove battery. Refer to PG-124, "Exploded View". 4. Remove air duct (suction). 5. Disconnect mass air flow sensor harness connector.6. Remove air cleaner case by sliding the air cleaner case frontward.
CAUTION:Slide the air cleaner case carefully so as not to damage it on the air cleaner case and harness bracket.
INSTALLATION
• Install in the reverse order of removal.
Was this page helpful?