Engine Mechanical K9K
EGR valve
In this manual: Engine Mechanical K9K
~1min read
Exploded View

1. EGR valve assembly 2. Clamp
3. EGR tube
4. Air inlet tube
5. O-ring
6. Gasket
7. EGR cooler
8. Gasket
9. EGR volume control valve housing 10. Gasket
11. Electric throttle control actuator 12. Gasket
13. EGR volume control valve 14. Clamp
15. Cooling hose
A. To exhaust manifold B. To intake manifold
: N·m (kg-m, ft-lb)
: Always replace after every
disassembly.
Removal and Installation
REMOVAL
1. Drain engine coolant. Refer to CO-62, "Draining". 2. Remove air cleaner case. Refer to EM-280, "Exploded View". 3. Remove cowl top extension. Refer to EXT-20, "Exploded View". 4. Remove turbocharger air inlet pipe. Refer to EM-280, "Exploded View". 5. Remove air inlet tube assembly and air inlet tube. Refer to EM-281, "Exploded View". 6. Remove electric throttle control actuator. 7. Disconnect EGR solenoid valve connector. 8. Remove cooling hose. 9. Remove EGR volume control valve housing mounting bolts.10. Remove EGR assembly.
INSTALLATION
• Install in the reverse order of removal.
Was this page helpful?