Transmission & Driveline

Transmission Range Switch

~1min read
Exploded View
1. Lock washer 2. Manual lever 3. Transmission range switch
4. CVT 5. Manual shaft
Removal and Installation

REMOVAL

Remove air cleaner and air duct. Refer to Removal and Installation.

Remove control cable nut (A).

Remove manual lever nut (B) and lock washer (C) from the bracket and remove manual lever.

Remove bolts (D) and disconnect harness connector (E).

Remove transmission range switch.

INSTALLATION

Install new transmission range switch.

Install the manual lever.

Use the manual lever to shift the CVT into Neutral (N).

Remove the manual lever.

Assemble Tool.

Tool number : — (J-52306)

Place Tool (A) onto the manual shaft (B) while inserting its pin in the hole of the transmission range switch.

Tool number : — (J-52306)

Tighten bolts (A) to specification and remove Tool. Refer to Exploded View.

Tool number : — (J-52306)

Install the manual lever and lock washer and tighten nut to specification. Refer to Exploded View.

Install remaining components in reverse order of removal.

INSPECTION AFTER INSTALLATION