Renault Kangoo Quiz
Chassis

Clutch control cable

In this manual: Chassis
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

REMOVAL

In the engine compartment, unhook the cable from the release fork.

Câble de commande de débrayage

Press the pedal to pull the cable.

In the cabin, remove:

  • the screw ( 1 ),
  • the stiffener ( 2 ),
  • the pedal shaft nut ( 3 ).
Câble de commande de débrayage

Release the cable end from its housing on the self-adjuster quadrant.

Remove the conduit stop from the bulkhead.

Pull the complete cable out through the engine compartment.

INSTALLATION

From the engine compartment, feed the cable through the bulkhead.

Place the cable end in its housing on the self-adjuster quadrant.

Refit the clutch pedal.

Check that the self-adjuster pawls return to their rest position.

In the engine compartment, fit the cable onto the clutch release fork.

Make sure the conduit stop is correctly aligned on the bulkhead.

Press the clutch pedal to clip the conduit stop onto the bulkhead. Adjustment is made automatically.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.