Chassis
Vacuum pump
In this manual: Chassis
~1min read
Diesel engine
REMOVAL
Drain the cooling system.
Remove the air intake duct, along with its bracket.
Disconnect the snap-fit vacuum pipe.
Remove the thermostat housing bracket (2 screws).
Remove the vacuum pump (2 screws, 2 nuts).

Always replace the drive dog when replacing the pump.
INSTALLATION
Refit in reverse order of removal.
Bleed the cooling circuit.
CHECKING
Engine warm, at 4000 rpm, the minimum vacuum must be 700 mbar (525 mm Hg) within 3 seconds.
Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?