Heater partition

Replacing this part is an additional operation to the front wheel arch or the lower bay crossmember for a side impact.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Assembly consisting of:
Right-hand heater bulkhead bracket
Left-hand heater bulkhead bracket
Right-hand heater bulkhead reinforcement
Left-hand heater bulkhead reinforcement

PARTS CONCERNED (thickness in mm):

1. 1
   Heater bulkhead 0.7
2. 2
   Right-hand heater bulkhead bracket 1.2
3. 3
   Left-hand heater bulkhead bracket 1.2
4. 4
   Right-hand heater bulkhead reinforcement 1
5. 5
   Left-hand heater bulkhead reinforcement 1
6. 6
   Upper apron crossmember 1