Renault Megane Quiz
Bodywork

Lower cowl crossmember closing panel

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
2steps
~12min
1/5difficulty
Done 0 of 2

Replacing this part is combined with the heater bulkhead for a side impact at the front pillar.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Assembly consisting of:
Lower cowl crossmember centre reinforcement

Fermeture de traverse inférieure de baie

PARTS CONCERNED (thickness in mm):

  1. Lower cowl crossmember, upper section 0.7
  2. Lower cowl crossmember centre reinforcement 1.2

PART IN POSITION

Fermeture de traverse inférieure de baie

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.