Bodywork

Lower dash panel crossmember

~1min read

Replacing this part is in addition to replacing the dash panel reinforcement and the partial dash panel, for a side impact.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Part supplied alone.

Traverse inférieure de tablier

PARTS CONCERNED (thickness in mm):

  1. Lower dash panel crossmember 2.5

PART IN POSITION

Traverse inférieure de tablier

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.