Electrical equipment
"Basic" navigation
In this manual: Electrical equipment
~1min read
Essential special tools |
|
| Ms. 1544 | Radio removal tool - Carminat Becker |
REMOVAL
- Disconnect the battery.

- Insert the tool (Ms. 1544) into the two holes (1).
- Pull on the two tools in line with the radio navigation unit.
WARNING The antenna cable is very fragile. Do not pinch or kink it.
- Disconnect the connectors.
- Remove the tool by pressing the latches (2).
INSTALLATION
- Reconnect all connectors.
Connect the battery; carry out the necessary relearn procedures (see Battery chapter).
- Enter the protection code.
If the radio navigation unit is connected to a front-loading CD changer, the protection code of the old radio navigation unit must be entered when the display shows "CD CODE" (Radio chapter, Radio Security, page 86A-3).
- Carry out the radio navigation unit setup.
- Insert the CD-ROM.
- Wait for the system to locate its position (calibration).
- Set the time.
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?