Electrical equipment
High-end navigation: Initialisation
In this manual: Electrical equipment
~1min read
This procedure must be carried out each time a part is replaced.
System configurations

If the vehicle is fitted with a radio, it must be switched on during initialisation. Otherwise, the steering wheel controls will not work and the screen will not display the radio data.
- Switch off the ignition.
- Wait for the system to shut down completely.
- Switch on the radio.
- Turn the ignition on (wait approximately 20 seconds).
- Press the "M" and "C" buttons simultaneously.
- Read the vehicle reference.
- Test the steering wheel control (the screen displays the GPS antenna connection: connected - not connected). Ignore the radio and telephone antenna tests.
- Exit initialisation using the rotary knob.
- Turn the ignition off (1 minute).
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?