Renault Megane Quiz
Electrical equipment

High-end navigation: Changing the language

In this manual: Electrical equipment
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

After replacing the electronic navigation unit, the system will be programmed in French by default.

  • With the ignition on, remove the map CD-ROM from the electronic navigation unit by pressing the eject button (the screen displays the message "No CD in the drive").
  • Confirm "OK" by pressing the rotary knob.
  • Select the "configurations" menu.
  • Select the "language" menu.
Note: If the required language does not appear in the menu, apply the following procedure:
  • Select "other language". The system then asks you to insert the language CD-ROM.
  • Insert the language CD-ROM.
  • Confirm by pressing the rotary knob.
  • Using the rotary knob, select the language to replace (language 1 or 2).
  • Using the rotary "load" knob, select the language to load from those available on the CD-ROM.
  • Wait a few seconds: the screen goes black, then turns white with text in black and red and a horizontal bar showing the loading progress. When loading is complete, the language CD-ROM is ejected from the drive and "OK" is displayed on the screen.
  • Carry out the language change procedure.
  • Reinsert the map CD-ROM into the drive.

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.