Control description

Mode selector lever 1: Used to select one of the operating modes described below.

VENT 2: Air at a controlled temperature flows out of the center and side vents.

BI-LEVEL 3:
Air at a controlled temperature flows out of the footwell vents, and slightly cooler air flows out of the center and side vents. However, if the temperature control lever is at the "COLD" or "HOT" end position, the air temperature from the footwell, center and side vents is the same.

HEAT 4: Air at a controlled temperature flows out of the footwell vents.

HEAT AND DEFROST
5: Air at a controlled temperature flows out of the footwell vents and the center and side window defrosters.

DEFROST 6:
Air at a controlled temperature flows out of the side and center defroster vents.

Air intake lever 7: Used to select between recirculating the air inside the vehicle and drawing in outside air.

Temperature control lever 8: Used to change the temperature of the air flowing from the vents.

Fan lever 9: Used to switch the blower on and adjust its speed. It has five positions: OFF and four positions corresponding to increasingly higher speeds.