Audio / Visual / Telematics

XM Tuner Antenna Disconnected (B15FE,B15FF)

~2min read
DESCRIPTION

These DTCs are stored when a malfunction occurs in the satellite radio antenna assembly which is connected to the stereo component tuner assembly.

DTC No.

DTC Detection Condition

Trouble Area

B15FE

The satellite radio antenna assembly is not connected.

  • No. 2 instrument panel wire
  • No. 2 antenna cord sub-assembly
  • No. 3antenna cord sub-assembly
  • Satellite radio antenna assembly
  • Stereo component tuner assembly
  • Radio and display receiver assembly

B15FF

A short occurs in the satellite radio antenna assembly.

CAUTION / NOTICE / HINT

NOTICE:

After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).

PROCEDURE
  1. CHECK CONNECTION OF SATELLITE RADIO ANTENNA CABLE

(a) Check if the satellite radio antenna cable is securely connected to the stereo component tuner assembly.

OK:

Satellite radio antenna cable is securely connected.


NG

SECURELY CONNECT SATELLITE RADIOANTENNA CABLE

OK
  1. REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY

(a) Replace the No. 3 antenna cord sub-assembly (See page ).


(b) Clear the DTCs (See page ).


(c) Recheck for DTCs and check if the same DTC are output again.

OK:

No DTCs are output.


OK

END

NG
  1. REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY

(a) Replace the No. 2 antenna cord sub-assembly (See page ).


(b) Clear the DTCs (See page ).


(c) Recheck for DTCs and check if the same DTC are output again.

OK:

No DTCs are output.


OK

END

NG
  1. REPLACE SATELLITE RADIO ANTENNA ASSEMBLY

(a) Replace the satellite radio antenna assembly (See page ).


(b) Clear the DTCs (See page ).


(c) Recheck for DTCs and check if the same DTC are output again.

OK:

No DTCs are output.


OK

END

NG
  1. REPLACE NO. 2 INSTRUMENT PANEL WIRE

(a) Replace the No. 2 instrument panel wire (See page ).


(b) Clear the DTCs (See page ).


(c) Recheck for DTCs and check if the same DTC are output again.

OK:

No DTCs are output.


OK

END

NG
  1. REPLACE STEREO COMPONENT TUNER ASSEMBLY

(a) Replace the stereo component tuner assembly (See page ).


(b) Clear the DTCs (See page ).


(c) Recheck for DTCs and check if the same DTC are output again.

OK:

No DTCs are output.


OK

END


NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.