Maintenance
Fog Light Bulb
In this manual: Maintenance
~1min read
Removal
REMOVAL
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side as for the LH side.
- The procedure described below applies to the LH side.
PROCEDURE
1. SEPARATE FRONT FENDER LINER
(a) Remove the 2 screws and clip, and fold back the rear part of the front fender liner.
2. REMOVE FOG LIGHT BULB
(a) Disconnect the connector. |
![]() |
(b) Turn the fog light bulb as shown in the illustration to remove it.
![]() |
Remove in this direction |
Installation
INSTALLATION
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side as for the LH side.
- The procedure described below applies to the LH side.
PROCEDURE
1. INSTALL FRONT TURN SIGNAL BULB
(a) Turn the fog light bulb as shown in the illustration to install it.
![]() |
Install in this direction |
(b) Connect the connector.
2. INSTALL FRONT FENDER APRON
(a) Install the front fender liner using the clip and 2 screws.
Was this page helpful?

.png)
.png)