Maintenance

3zr-fae Drive Belt

~2min read

Components

COMPONENTS

ILLUSTRATION

*1

FAN AND GENERATOR V-RIBBED BELT

*2

REAR RIGHT ENGINE UNDER COVER

Removal

REMOVAL

PROCEDURE

1. REMOVE REAR RIGHT ENGINE UNDER COVER

(a) Remove the 2 screws, 6 clips and the rear right engine under cover from the vehicle.

2. REMOVE FAN AND GENERATOR V-RIBBED BELT

(a) Attach a wrench to the hexagonal portion (A) or (B) of the belt tensioner assembly as shown in the illustration.

*a

5 mm 12-point Wrench

*b

Hole

*c

Gap

(b) Turn the belt tensioner assembly clockwise to align the hole with the gap, then insert a 5 mm 12-point wrench into the hole to lock the belt tensioner assembly.

(c) Remove the fan and generator V-ribbed belt from the belt tensioner assembly.

Installation

INSTALLATION

PROCEDURE

1. INSTALL FAN AND GENERATOR V-RIBBED BELT

(a) Set the fan and generator V-ribbed belt on each pulley.

(b) Attach a wrench to the hexagonal portion (A) or (B) of the belt tensioner assembly as shown in the illustration, then, while turning the belt tensioner assembly clockwise, remove the 5 mm 12-point wrench.

NOTICE:

Make sure the fan and generator V-ribbed belt is correctly fitted on each pulley.

2. INSPECT FAN AND GENERATOR V-RIBBED BELT

Click here

3. INSTALL REAR RIGHT ENGINE UNDER COVER

(a) Install the rear right engine under cover to the vehicle using the 2 screws and 6 clips.