Maintenance

Rear Turn Signal Light Bulb

~1min read

Components

COMPONENTS

ILLUSTRATION

*1

REAR COMBINATION LIGHT ASSEMBLY

*2

REAR COMBINATION LIGHT COVER

*3

REAR TURN SIGNAL LIGHT BULB

*4

REAR COMBINATION LIGHT WIRE AND SOCKET

Installation

INSTALLATION

PRECAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side as for the LH side.
  • The procedure described below applies to the LH side.

PROCEDURE

1. INSTALL REAR TURN SIGNAL BULB

(a) Install the rear turn signal bulb into the socket and rear combination light wire as shown in the illustration.

Install in this direction

(b) Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to connect the assembly.

Install in this direction

2. INSTALL REAR COMBINATION LIGHT ASSEMBLY

Click here

3. INSTALL REAR COMBINATION LIGHT COVER

Click here

Removal

REMOVAL

PRECAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side as for the LH side.
  • The procedure described below applies to the LH side.

PROCEDURE

1. REMOVE REAR COMBINATION LIGHT COVER

Click here

2. REMOVE REAR COMBINATION LIGHT ASSEMBLY

Click here

3. REMOVE REAR TURN SIGNAL BULB

(a) Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to disconnect the assembly.

Remove in this direction

(b) Remove the rear turn signal bulb from the socket and rear combination light wire as shown in the illustration.

Remove in this direction