Maintenance

Transmitter Battery (without Smart Key System)

~3min read

Components

COMPONENTS

ILLUSTRATION

*1

DOOR CONTROL TRANSMITTER TRIM

*2

TRANSMITTER BATTERY

*3

TRANSMITTER HOUSING COVER

*4

TRANSMITTER HOUSING

Installation

INSTALLATION

PRECAUTION / NOTICE / HINT

NOTICE:

Handle these high-precision electronic components with the greatest care.

PROCEDURE

1. INSTALL TRANSMITTER BATTERY

(a) Install a new transmitter battery with the positive (+) side facing up, as shown in the illustration.

Install in this direction

NOTICE:

  • Do not bend the transmitter battery electrode during installation.
  • Keep the transmitter housing cover free of dust and oil.
  • When replacing the transmitter battery, before starting work, discharge static electricity built up in the body by touching the vehicle, for example, to avoid damaging the electronic transmitter.

2. INSTALL DOOR CONTROL TRANSMITTER TRIM

(a) Install the door control transmitter trim as shown in the illustration.

Install in this direction

3. INSTALL TRANSMITTER HOUSING COVER

(a) Install the transmitter housing cover as shown in the illustration.

Install in this direction

Removal

REMOVAL

PRECAUTION / NOTICE / HINT

NOTICE:

Handle these high-precision electronic components with the greatest care.

PROCEDURE

1. REMOVE TRANSMITTER HOUSING COVER

(a) Using a screwdriver whose tip is wrapped in protective tape, remove the transmitter housing cover as shown in the illustration.

*a

Protective tape

Remove in this direction

NOTICE:

Do not apply excessive force when removing the transmitter housing cover.

2. REMOVE DOOR CONTROL TRANSMITTER TRIM

(a) Using a screwdriver whose tip is wrapped in protective tape, remove the door control transmitter trim as shown in the illustration.

*a

Protective tape

Remove in this direction

3. REMOVE TRANSMITTER BATTERY

(a) Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery as shown in the illustration.

*a

Protective tape

Remove in this direction

NOTICE:

  • Do not press the terminals with your finger.
  • Do not force the transmitter battery out, as the terminals may be damaged.
  • Do not touch the transmitter battery with wet hands. Moisture may cause corrosion.
  • Do not touch or move the components inside the transmitter. Otherwise, it may no longer function properly.
  • When replacing the transmitter battery, before starting work, discharge static electricity built up in the body by touching the vehicle, for example, to avoid damaging the electronic transmitter.