Maintenance

Transmitter Battery (with Smart Key System)

~3min read

Components

COMPONENTS

ILLUSTRATION

*1

TRANSMITTER BATTERY

*2

MECHANICAL KEY

*3

TRANSMITTER HOUSING COVER

*4

TRANSMITTER HOUSING

*5

SMART DOOR CONTROL TRANSMITTER HOUSING ASSEMBLY

-

-

Removal

REMOVAL

PRECAUTION / NOTICE / HINT

NOTICE:

Handle these high-precision electronic components with the greatest care.

PROCEDURE

1. REMOVE TRANSMITTER BATTERY

(a) Slide the key release button to remove the mechanical key, as shown in the illustration.

*a

Key release button

Remove in this direction

(b) Pry off the transmitter housing cover with a screwdriver whose tip is wrapped in protective tape.

NOTICE:

Do not apply excessive force when removing the transmitter housing cover.

*a

Protective tape

(c) Using a screwdriver whose tip is wrapped in protective tape, remove the transmitter battery as shown in the illustration.

NOTICE:

  • Do not press the terminals with your finger.
  • Do not force the transmitter battery out, as the terminals may be damaged.
  • Do not touch the transmitter battery with wet hands. Moisture may cause corrosion.
  • Do not touch or move the components inside the transmitter housing. Otherwise, it may no longer function properly.
  • When replacing the transmitter battery, before starting work, discharge static electricity built up in the body by touching the vehicle, for example, to avoid damaging the electronic key transmitter subassembly.

*a

Protective tape

Remove in this direction

Installation

INSTALLATION

PRECAUTION / NOTICE / HINT

NOTICE:

Handle these high-precision electronic components with the greatest care.

PROCEDURE

1. INSTALL TRANSMITTER BATTERY

(a) Install a new transmitter battery with the positive (+) side facing up, as shown in the illustration.

NOTICE:

  • Do not bend the transmitter battery electrode during installation.
  • Keep the transmitter housing cover free of dust and oil.
  • When replacing the transmitter battery, before starting work, discharge static electricity built up in the body by touching the vehicle, for example, to avoid damaging the electronic key transmitter subassembly.

Install in this direction

(b) Install the transmitter housing cover by pressing it on as shown in the illustration.

Install in this direction

(c) Insert the mechanical key into the transmitter, as shown in the illustration.

Install in this direction

(d) Press one of the transmitter switches and check that the LED lights up.

OK:

The transmitter LED lights up when a switch is pressed.