How to Use Troubleshooting
PRECAUTION / NOTICE / HINT
HINT:
- Perform the following procedure to troubleshoot the Entune system.
- *: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
|
CHECK CUSTOMER CONTRACT STATUS
(a) Using the vehicle search function on the TIS system, check whether the satellite radio and Toyota Entune contracts are valid or have expired.
Result:
Result | Proceed to |
|---|---|
Both contracts are valid. |
A |
The satellite radio contract is not valid. |
B |
The Toyota Entune contract is not valid. |
C |
| B | GO TO AUDIO AND VIDEO SYSTEM |
| C | GO TO SAFETY CONNECT SYSTEM |
|
CHECK CAN COMMUNICATION SYSTEM*
(a) Check whether CAN communication system DTCs are output.
Click here![]()
Result:
Result | Proceed to |
|---|---|
No CAN system DTCs are output. |
A |
CAN-related DTCs are output. |
B |
| B | GO TO CAN COMMUNICATION SYSTEM |
|
CHECK DTCs*
(a) Perform the status check.
Click here![]()
(b) Check whether any DTCs are output, and record them.
(c) Clear the DTCs.
(d) Check the DTCs again. Try to reproduce the DTCs by simulating the conditions indicated by the DTCs.
Result:
Result | Proceed to |
|---|---|
No DTCs are output. |
A |
DTCs for the audio and visual system are output. |
B |
DTCs for the Safety Connect system are output. |
C |
DTCs for the Entune system are output. |
D |
| B | GO TO AUDIO AND VIDEO SYSTEM |
| C | GO TO SAFETY CONNECT SYSTEM |
| D | GO TO DIAGNOSTIC TROUBLE CODE CHART |
|
SYMPTOM TROUBLESHOOTING TABLE
(a) Refer to the Symptom Troubleshooting Table.
Click here![]()
Result:
Result | Proceed to |
|---|---|
The malfunction is not listed in the Symptom Troubleshooting Table. |
A |
The malfunction is listed in the Symptom Troubleshooting Table. |
B |
HINT:
If the symptom does not reoccur and no DTCs are output, perform the simulation method.
Click here![]()
| B | GO TO STEP 7 |
|
PERFORM TROUBLESHOOTING*
(a) Refer to the ECU terminals.
Click here![]()
|
REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | END |